Thanks again.

--- In Jumbuck@..., neil jeffries <vk2kyg@...> wrote:
>
> The chassis connector wiring is in the diagrams P9 interior
lighting,bottom right of page in the jumbuck manual.
> regards Neil
>
>
> waauus <waauus@...> wrote: Some of you
probably already know what would cause this but for those
> that don't.....
> I've just had this fault on my jumbuck. When you put the indicators
> on everything is fine but as soon as you put your foot on the brake
> the indicators stop flashing and the brakelights flash instead. No
> globes or fuses are blown. Turns out it is a bad earth somewhere. A
> temporary fix is to attach a piece of wire from the brake lamp holder
> to the chassis of the car.
> I'm going to have a quick look to see if I can find the loose
> connection (thanks for the diagrams Neil) but since I only have just
> over 1000kms on the clock I will probably end up taking it back to the
> dealer.
>
> Related to wiring, does anyone have the pinouts for the Chassis
> connector, the one located behind the driver on the side of the tray?
> Thanks.
>
> Cheers
>
>
>
>
>
>
> ---------------------------------
> Sick of deleting your inbox? Yahoo!7 Mail has free unlimited
storage. Get it now.
>