You can set the sort order of messages. Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Fellow Jumbuck members still having some minor issues with conversion,the air-con wiring,did you use the old 1.5 loam for the air-con or have you changed it to...
Hi Graham DO not change any looms,you can use all the original jumbuck looms,air con and dash. You will need to re-configure the pins in the air con loom plug...
Hi Guys Well after nearly 5 years I finally bit the bullet and cut the hole in the bonnet for the air scoop to work properly to let the engine bay heat out.As...
Hi Mitchell Welcome to the jumbuck group Have a good look around here mate,The information is more accurate and suited for the jumbuck than anything you will...
Hey fella's just wondering how hard is it to put the gti bar on? Cost? And can I do it wif out puttin the wheel gaurds on? And if any1 no's a good places in...
It is very easy to fit the GTi bar to the jumbuck,It is only held on by 4 bolts,2 screws,and 2 plastic plugs underneath,simple.same mounting points as the...
Hey guys, i got a 2003 jumbuck, and it has got the standard 4g15 engine in it and it can beat other cars like 1.8 astra and similar but looking for something...
Hi Mitchell If you want to do a conversion,look for any 4G93 engine,GTi,M21,or CC lancer any early 4G93 engine will bolt straight in,but you will need to get...
Hey Mitchell, where about are you located? there are a few different motors you can put into. if you wanna stay N/A you can put in the 4G92 (1.6 mivec), it has...
thanks for all the info i was gonna w8 till i was off my P's till i do the conversion, so i might go with the 93T. also just havin a look at some of the mods...
Hi Mitchell Yes the carbon fiber is a vinyl Film made by SAAS you should be able to buy it at most auto shops,It's 500 X 1000mm in size per pox for around...
Hey Mitchell, dont get king springs there useless.. if you want ive got a customs rear alxe that will be up for sale soon.. it will lower the car without...
thanks for the advice, realy appreciate it. what engine would be the best for torque + but also good speed. i do want to put a turbo on it so i wont something...
Mitchell keep in mind if you go a 93T or 63T engine you will have to change the K Frame depending on weather you use a FWD or AWD gearbox locket to fwd. If you...
Hi Glad you found us. If you have any questions Just ask. Have a good look around and let us know your plans for your jumbuck and weather you have any mods...
Hi Guys I started making a CAI scoop this week for the GTi front bar. I wanted to keep the factory mesh in tact,so I had many attempts at making a paper...
atm im a bit short on cash, also i got to ok all this with my insurance company. ill see what situation im in when u got it for sale casue im interested in it...
Hey guys, does this sound like an O2 Sensor has gone This is the storey Changed the Fuel filter and its started to smelt like fuel (old fuel filter was blocked...
Hi Mitchell Have you had a look at the Black carbon canister? The fuel return line runs down to a valve at the carbon canister under the brake booster. Have a...
Mitchell, Check the 16mm id. fuel tank breather hose from the rear of the tank to the filler neck. Mine had a small split where it fitted on to the tank and...
Thanks Guys, this realy helps. ill check it out tomorrow at work, thanks for the offer neil if its not the Canister or the breather hose i will buy that O2...
Hey guys, That Breather Hose has Perished beyond belief, when i replace it hopefuly that aircon doesnt smell Thanks again for all your help Mitchell...
Hey Guys, im looking at fitting some Subs in the Buck, Looking at some of the Photos piticularly the ones about sound deadning and there is 2 holes in the rear...
well it shouldnt affect insurance. because it look stock.. apart fromt he mount i said before.. but it will be ready to send out on the weekend i reckon.. im...
I was running a 10" woofer behind the passanges seat. was good very small box but it just took up too much room now im running a pair of alpine tyre R's.. with...
Graham It will depend on who you use,and how much information they have to research.Try and find one that has done lancers/protons before. When I got mine...
Neil engineering cert just cost me $500.00 for 5 min for him to look at it. Air con wiring used the loam from the lancer that I removed the engine and all...
He must be a dodgy engineer if he only looked at it for 5min. I spent 5 months going through every detail with my engineer. Did you do the rear disk brake...
what do you mean when you say it depends on what i want to do with it does that mean if i wonted to have rotors it is set up with Rotors also looking at...
