hey everyone, just need to check with all the jumbuck drivers out there with towbars. does the wiring for the trailer lights need to be spliced into the loom...
Hi Guys. In a further attempt,now the bonnet vents are finished,To reduce radiant engine bay temps,I have decided to loose some BLING,and wrap my intercooler...
Hi Guys I have lots of parts left over after the conversion,so it's time now to clear out the shed and make some room. Here is a list and pics. 63mm nudge bar...
They were pricey at the time ben,but all the ones I have seen aftermarket don't look as good IMO the smooth factory ones look good. Out of interest price one...
Hi Guys I have made the rain covers for my bonnet vents,out of 1.6mm aluminium plate.There very light yet strong enough not to bend.This is what I came up...
Yeah i think 2500 is tooooo much.. i did do some googling but didnt in one i wanted so i was talking to my mate/business partner and we are going to have a go...
Hi Ben It's hard to say,I have seen 6 hard covers for the jumbuck on ebay this year alone. I haven't seen a smooth aftermarket type,there usually that rough...
Hey guys, Â i will be looking for a hard cover soon cos i need it to hide part in the tray... Â Where is the best place to get a cover.. i want a smooth...
Hi Guys Well after looking into air vents for years and driving around in some really hot days the engine temps crept up 15 degree C on hot days. So after...
There is more then kings out there for front... kings aint the best.. there is pedders lovells.. then you could get front coil overs the rears.. you could get...
hi tony, i had mine lowered by fulcrum here in brissie , don't what brand they used but they've never given any trouble at all. in fact i whish they had sagged...
Hi Tony kings front springs, reset proton leafs in rear. I don't know if there is any other brands for the leafs,just the kings are shit. Stay away from king...
G'day All what is the best way,When lowereing your jumbuck. 1. kings springs front, king leafs rear 2. kings front springs, reset proton leafs in rear 3. reset...
hi neil, i used a gps for the readings.with the tyre size i have gti rims on my jumbuck and my speedo is accurate . i would say the speedo would be a little...
That's good to know Tony.But if you still have stock wheels of 195x14x70 does that mean it will read wrong? How did you test the accuracy of the speedo and...
Hahaha That's funny coz I had partly tried the passenger side,and thought it was ok,but I never tried the drivers side. So I guess with a GTi box fitted you...
Hi all, just some info. siemens gti clusters will work on your jumbuck (4g15) with no problems, as long as you are running 205/45/16. tacho and kms are spot...
 you know on the end of the shaft that goes into the box.. the triangle looking thing.. the cv thingos on the drivers side the jumbuck shaft didnt fit in,...
I'm not sure what you mean there benny? The thing on the end with the thing????WTF??haha,but if there the same length and same diameter I can't see why they...
I will, its not the lenght of the shafts it the bearing thing on the end of the shaft with the 3 round things.. there larger then the gti ones cos i couldnt...
That's good to hear benny,Take plenty of pics for us mate wont ya? AWD woohoo.. What was the difference with the shafts benny I have had GTi,GSR,and Jumbuck...
also forgot the add... if you do change to a gti box ive got a brand new clutch for one... semi ceramic.. 3 puk.. will never slip.. but i will need aleast 500...
I not 100% sure but i reckon the 93p will bolt upto the 4g15 box.. as the flywheel isnt raised like the gsr ones.. but as i said im not sure.. but you do get a...
awsome, cause i am very interested in it. it might be sooner than i though before, i get my $500 wage top up from the government plus my re-enbusment of tools...
Hello jeh1973 welcome to the jumbuck group. Look forward to seeing some pics of your ride and seeing what mods you are hoping to do.Have a good look around as...
Hi mitchell Yeah a 93P will have plenty of power compared to the 4G15P,But no you still need to change your gearbox. The jumbuck box wont clear the 93P or T...
No probs, it will just be sitting in the shed anyways.. as i dont think ill be able to sell it easy... when you can get it just email me and see if i still...
ok, well i would be just doin the drums atm. also i wouldnt be able to buy it for a while a few unexpected bills have come through thanks for the offer but atm...
thanks for the info, i would be doing all the work myself so thats not a big thing, but after hearing all the stuff you have to do just to get a Turbo Engine,...
