You can set the sort order of messages. Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
G-day all i have been a members for short time now and thought i would take the opportunity to introduce my self. I live in North Queensland and work in the...
If I could put my 2 cents worth in, I'd *thoroughly* recommend Supertrim of Charles Street Coburg. A family business run by a father & two sons established in...
I had a problem like this one on a Peugeot, it had one of the brake lines had been crushed and would not let the fluid return quickly just a thought but might...
C & N Vehicle Trimming in Sunshine - Charlie 9311 0722 They specialise in customising, seat repairs, tonneau covers, carpets, cloth inserts, etc. ... one of...
Lance, Entries are accepted from now to on the day (no cut-off date), however, pre-entries are recommended for us to get an idea of car numbers and positioning...
hi guys just wondering do you know of a good trimmer in melbourne . one of the last things l need for my ute. thanks ... Check out the hottest 2008 models...
Hi there, residual line pressure should only be around 2/4 psi.Only enough to hold the seals against the wheel cylinder housing to stop leaks. How about the...
WTB hub caps fiesta or lancer others considered what have you got 13 14 or 15 inch let me know as I've got some different rim size options would prefer on the...
its quite obviously a rejection problem! the tenth commandment reads:" thou shalt not put Holden parts on thy ford" Holden brakes aren't meant to work...
Hi sean, First determine if all brakes are binding or front or rear only. If all the brakes are binding or not releasing. I would say that the problem would be...
Sounds like there is a non return valve in there somewhere not letting fluid return, have you checked the lines to make sure there is no blockages??...
Hi all, I have a problem with my 4 wheel drum braked XL. After fitting a new master cylinder (HQ drum model) all 4 brakes will stay on for about 20 seconds and...
Okay, so I tracked down Gary Scott at Metallising Australia. Turns out that his Dad, Glenn Scott was one of the drivers in the famous XP Durability Run in...
Thanks for all the replys! I'm in Vic, and been meaning to get into the vic club. I don't know if i'd attend a lot of meets though, tend to go to Rod meets...
For Early Falcon Car Club of Victoria Inc. 1. You need to be a Member for a minimum of 12 months before being eligible to apply. 2. The Vehicle has to be...
In qld you can get plates from the trasport dept for vintage/show cars. Restrictions like only 15km from home, to and from repairers and club events only. Most...
A quick search of Google came up with the following from one of the FC-FE Club: http://www.fefcholden.org.au/nsw/tmp/hist_veh_policy.doc Deon ... requisites...
ive got a set of advance headers, they make a set specifically for XP + 302 which may well do the job. Note they wont clear a 5.0 as the starter motor is on...
Hi all, Am stuck in a rut, well, stuck between a firewall and a steering rack to be precise. I am after some advice on what extractors to use to clear an RRS...
don't know what its actually called but you are correct it is a "greeny silver" colour, maybe silvery green! red rocker cover and filter are correct for a 170...
Does anybody have a set of xp coupe buckets they would like to part with and also wanting a set of stainless mouldings for futura my coupe has the holes bogged...
