You can set the sort order of messages. Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Reminder from: earlyfalcons Yahoo!7 Group http://au.groups.yahoo.com/group/earlyfalcons/cal Early Falcon Car Club of Victoria - Monthly Meeting Wednesday 2...
earlyfalcons@...
Sep 1, 2009 9:55 am
8087
Thanks for the link, your a legend, very informative and easy to read. I connected the 2 wires on the top and bottom of the inhibitor switch as per the link....
Check out the Restoration Hint "Reverse Order" for full story about the inhibitor/reversing light switch here - > http://stormloader.com/falconccwa/hint.htm ...
G'day john, Ok,so I have 2 wires going from the cabin through a rubber grommet at the firewall into the engine bay. 1st wire is green & coming out of the...
G'day, I'm currently restoring a xm coupe, I've got a 65 xp fairmont donor car and using the 200ci/BW35, diff and the whole wiring loom. I'm currently got a...
Have you asked if there is any differance being a ute seen as there is no rear seat surely there would have to be something for utes I would sure be asking the...
Nah, i think it was brought in because of the introduction of front air bags, apparently they can take a kids head clean off. Stupid twits should have made a...
My ute is also up for sale, In brisbane. Old farm ute, no rust what so ever, apart from where the the bumperettes were. 114miles on the clock. Complete car,...
Hi, I am in the same situation. If you possibly can, some pics would be very
helpful . Thanks....Mal. ... From: earlyfalcons Date: 08/26/09 23:25:27 To:...
Hi Michael, I tried to take some pictures of mine but it is too dark in there. All you need to do is have a bit of light angle welded in there. This can be...
Hi All Due to personal reasons I have to move out of the factory that I lease for my business so I no longer have room to keep my next project so it has to go....
Hi Mick, yes they need to be reinforced. The 'C' pillars are the ones just in front of the rear screen on the sides with the coupes. They get alot of flex over...
Hi Guys I have read about the problem with the xp coupes after years of slamming the door, the paint starts cracking under the silver moulding in the back...
I thought it was brillant design because the shaft of the headlight knob actually undoes the bezel. U just put it in on an angle and turn. Sent from my iPhone...
that sought of simple repetive thing is what they did with holdens, cause the owners were like that! fords mix it up a bit ,cause the owners can work it out....
thanks for that guys, ill have a go tonight. god forbid the designer had used the same method to get all of the knobs out. thats crazy talk! On Wed, Aug 19,...
Sorry about that folks, you need to insert KNOB here '... pulling the HL Switch <here> right out and then ... . I guess most people reading it would get the...
2 speeds were optional in xp, not sure why you'd have one when a 3 speed was available though, terrible things! To convert you need: carby linkage,kickdown...
Linkages are different, inhibiter and reverse switch will need to be re-wired, If you have a 2 speed you will have the narrow block, you will need an adaptor...
Hi all, I am changing from a 2 speed auto ford-o-matic to a 3 speed auto borg warner type 35 and just wanted to know what i will need to change in my falcon XP...
all of the above works,a pair of those cheapy long nose pliers you see at the markets the ones with the bent tips(almost at right angles) works for me on wiper...
All the info regarding the wiper switch is correct, I have seen a cheap wide flat blade screwdriver with a slot cut up the blade with an angle grinder do the...
The Wiper knob has an allen key screw holding the knob on. You will see in the chrome bezel a cross looking lock. you can simply tap anti clockwise with a...
without being able to look, if i remember rightly the light assembly has a stupid little button thingy under dash to press which releases light knob...if you...
