Sign In
New User? Sign Up
harryproa
? Already a member? Sign in to Yahoo!7

Yahoo!7 Groups Tips

Did you know...
You can search the group for older messages.

Messages

  Messages Help
Advanced
Material list   Message List  
Reply | Forward Message #1815 of 6642 |
Re: [harryproa] Re: Material list

Try Adhesive Technologies in Henderson.  They formulate WEST and will sell 200 litre drums.  Visit the NZ Multihull Yacht Club  and ask around.  Someone there will know the source of every cheap bit of boat gear available.  Same probably applies to other "non Royal" clubs, but the multi guys have a higher percentage of DIY owners than the mono guys.
 
regards,
 
rob
----- Original Message -----
Sent: Wednesday, March 01, 2006 8:52 AM
Subject: Re: [harryproa] Re: Material list

I haven't found anyone here that will sell it other than in 20litre lots. $400
for West, $260 for ados, can't find Botecote here.

------ Original Message ------
Received: Tue, 28 Feb 2006 05:49:16 PM MST
From: "Robert" <cateran1949@...>
To: harryproa@...
Subject: [harryproa] Re: Material list

I checked out the prices on the web and they were more than ATL
(`$3500delivered for 200 litres) or Botecote. Is this the price for
enquiries for large order?
Robert

--- In harryproa@..., David Howie <dana-tenacity@u...>
wrote:
>
>
> New quote on the resin $400 cheaper. Product is called Ados/CRC. I
hadn't
> heard of it, ran into a guy who used it on a Newick Tri here, liked
it. Do you
> know anything about it?
>
>
> Cheers
> David
>
>
> ------ Original Message ------
> Received: Sat, 25 Feb 2006 10:41:40 PM MST
> From: David Howie <dana-tenacity@u...>
> To: <harryproa@...>
> Subject: [harryproa] Material list
>
> Here at last.
> I know it's not very scientific (I invented 28% of a box of
screws), but more
> along the lines of a feasability study.
> Appreciate anything you can add.
>
> Cheers
> David
>
>
>
> > ---------------------------------------------
> >      Attachment: Harry Pricing.xls
> >      MIME Type: application/vnd.ms-excel
> > ---------------------------------------------
>










Fri Mar 3, 2006 9:23 am

proaharry
Offline Offline
Send Email Send Email

Forward
Message #1815 of 6642 |
Expand Messages Author Sort by Date

Here at last. I know it's not very scientific (I invented 28% of a box of screws), but more along the lines of a feasability study. Appreciate anything you can...
David Howie
oceanplodder...
Offline Send Email
Feb 26, 2006
5:41 am

New quote on the resin $400 cheaper. Product is called Ados/CRC. I hadn't heard of it, ran into a guy who used it on a Newick Tri here, liked it. Do you know...
David Howie
oceanplodder...
Offline Send Email
Feb 28, 2006
11:15 pm

I checked out the prices on the web and they were more than ATL (`$3500delivered for 200 litres) or Botecote. Is this the price for enquiries for large order? ...
Robert
cateran1949
Offline Send Email
Mar 1, 2006
12:49 am

I haven't found anyone here that will sell it other than in 20litre lots. $400 for West, $260 for ados, can't find Botecote here. ... Received: Tue, 28 Feb...
David Howie
oceanplodder...
Offline Send Email
Mar 1, 2006
12:53 am

-That seems a reasonable price. Botecote has a product called contracter wich is a 5:1 that retails at not much more than $10 a litre-for 240 litres-and a only...
Robert
cateran1949
Offline Send Email
Mar 1, 2006
7:48 am

G'day, I have not seen the spreadsheet (or the email that accompanied it) either. Maybe post it on the files section of the list, or send it to me and I will...
Rob Denney
proaharry
Offline Send Email
Mar 1, 2006
3:39 pm

the kevlar was from a US site for end of run sections. I did the conversion for the dollar but did not include freight, a one off that may not repeat itself....
Robert
cateran1949
Offline Send Email
Mar 2, 2006
12:01 am

Yeah Hi, Just like to inform about the contractors epoxy (cheaper 5:1) it smells a lot more than the more expensive 2:1 from BoteCote. I think you pay for your...
Doug Haines
doha720
Offline Send Email
Mar 3, 2006
10:38 am

Thanks for the info. I suspected as much but for resin infusion it shouldn't be such a problem and it should be more reliable with the lower viscosity. I'd...
Robert
cateran1949
Offline Send Email
Mar 3, 2006
11:22 am

Try Adhesive Technologies in Henderson. They formulate WEST and will sell 200 litre drums. Visit the NZ Multihull Yacht Club and ask around. Someone there...
Rob Denney
proaharry
Offline Send Email
Mar 3, 2006
9:24 am

Never heard of it, but if it is epoxy, should be fine. regards, rob ... From: David Howie To: harryproa@... Sent: Wednesday, March 01, 2006 7:15...
Rob Denney
proaharry
Offline Send Email
Mar 3, 2006
9:27 am

G'day, well done on the job. I will have the boat down at Jervois Bay Yacht Club (out the end on the northern side of Woodman's Point) on Sunday from about 10...
Rob Denney
proaharry
Offline Send Email
Mar 3, 2006
12:36 pm

Copyright © 2009 Yahoo! Australia & NZ Pty Ltd. All rights reserved.
Privacy Policy - Terms of Service - Guidelines - Help