G'day,

We can certainly supply all the materials, and any parts which may be
difficult (mast, beam structural members). Very roughly, the cost would be,
in kiri and glass:

The hulls are 24 sq m of 6mm kiri, plus maybe 20% for wastage, and a layer
of 400 gsm double bias each
side and 20 litres of epoxy.

There is another 4 sq m of kiriand 8 sq m of 400 db in the beams, plus a
couple of kgs of tow ($aus30 per kg).

The rudders are a couple of sq m of kiri, twice that of db and another 2
kgs of tow.

The rigs will cost a couple of grand if built by us, or you can build your
own using about 7 sq m
of uni carbon at $Aus50 per sq m) and another 6 kgs of tow..

So,
38 sq m of kiri at $30 per sq m $1,140
76 sq m of 400 double bias @ $5 per sq m $380
30 litres epoxy @ $11 $330
8 kgs of tow @$35 $280
7 sq m uni carbon @$50 per sq m $350

Total $2,480

The sails about $1,500, although we may get a deal if we can bulk order.
Soft tramp
a hundred bucks, hard tramp (15mm foam db each side) $200.

Pop top we are still getting quotes for, but between
$1,000 and $1,500. Again there may be some bulk discounts available.

Few bits of rope and some cleats and bits of tube for tillers and
trampoline, some powders for the epoxy and some paint and that is about it.
Allow another $1,000

Plans $aus1,000.

Couple of sheets of mdf for the frames, screws, sandpaper, gloves, etc
another couple of hundred dollars.

Total: $6,280

All plus 10% GST and freight.

Suspect it will be cheaper (and quicker, and lighter) to build it from foam,
but we won't know this until we have built the first one. I am in Coffs
from 7th June for one, maybe two weeks. Be good to dsee you if you are
there then. On the other hand, if you can leave it till late June, you will
see more of the finished artiocle.

regards,

Rob
----- Original Message -----
From: "Robert" <cateran1949@...>
To: <harryproa@...>
Sent: Tuesday, May 11, 2004 7:58 AM
Subject: [harryproa] Re: Harryproa Update


> Thanks Michelle,
> Love the latest version of the Harry and hope to see the Visionarry
> in the flesh in June when I am up that way. Are the little one's
> available as kits ie all the materials needed + plans and how much
> would they be. I am just curious, I don't have the time right now and
> as soon as I do , it'll be full bore on a Harry, probably this latest
> version.
>
>
>
>
> --- In harryproa@..., "michele balharry"
> <michele@o...> wrote:
> > Hello Everyone,
> >
> > Well, this was a long time coming - I hope you all find something of
> > interest in the latest updates at www.harryproa.com ;
> > a.. Elementarry and Elementarry camper in Australia and Brazil
> > http://www.harryproa.com/Elementarry.htm
> > b.. Harry http://www.harryproa.com/harry.htm
> > c.. Arttu Heinonen building Visionarry in Finland Report 3
> > http://www.harryproa.com/Arttu/Arttu_3.htm
> > d.. Building Visionarry in Australia Report 8
> > http://www.harryproa.com/building_Vis/building_Vis_8.htm
> > e.. Rob Denneys new e-mail address : proa@i...
> >
> > Cheers,
> >
> > Michele
> >
> >
> > --------------------------
> > Michele Balharry
> > Harryproa Pty. Ltd.
> > ph: +61 02 6655 2016
> > fax: +61 02 6655 9994
> > e-mail: michele@o...
> > web site: www.harryproa.com
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://au.groups.yahoo.com/group/harryproa/
>
> To unsubscribe from this group, send an email to:
> harryproa-unsubscribe@...
>
> Your use of Yahoo! Groups is subject to:
> http://au.docs.yahoo.com/info/terms/
>
>