-I have to be in Ballina on the 24th for a conference. We may just
cross if I can get to Coffs before it rather than after it.
Robert


-- In harryproa@..., "Rob Denney" <proa@i...> wrote:
> G'day,
>
> We can certainly supply all the materials, and any parts which may
be
> difficult (mast, beam structural members). Very roughly, the cost
would be,
> in kiri and glass:
>
> The hulls are 24 sq m of 6mm kiri, plus maybe 20% for wastage, and
a layer
> of 400 gsm double bias each
> side and 20 litres of epoxy.
>
> There is another 4 sq m of kiriand 8 sq m of 400 db in the beams,
plus a
> couple of kgs of tow ($aus30 per kg).
>
> The rudders are a couple of sq m of kiri, twice that of db and
another 2
> kgs of tow.
>
> The rigs will cost a couple of grand if built by us, or you can
build your
> own using about 7 sq m
> of uni carbon at $Aus50 per sq m) and another 6 kgs of tow..
>
> So,
> 38 sq m of kiri at $30 per sq m $1,140
> 76 sq m of 400 double bias @ $5 per sq m $380
> 30 litres epoxy @ $11 $330
> 8 kgs of tow @$35 $280
> 7 sq m uni carbon @$50 per sq m $350
>
> Total $2,480
>
> The sails about $1,500, although we may get a deal if we can bulk
order.
> Soft tramp
> a hundred bucks, hard tramp (15mm foam db each side) $200.
>
> Pop top we are still getting quotes for, but between
> $1,000 and $1,500. Again there may be some bulk discounts
available.
>
> Few bits of rope and some cleats and bits of tube for tillers and
> trampoline, some powders for the epoxy and some paint and that is
about it.
> Allow another $1,000
>
> Plans $aus1,000.
>
> Couple of sheets of mdf for the frames, screws, sandpaper, gloves,
etc
> another couple of hundred dollars.
>
> Total: $6,280
>
> All plus 10% GST and freight.
>
> Suspect it will be cheaper (and quicker, and lighter) to build it
from foam,
> but we won't know this until we have built the first one. I am in
Coffs
> from 7th June for one, maybe two weeks. Be good to dsee you if you
are
> there then. On the other hand, if you can leave it till late June,
you will
> see more of the finished artiocle.
>
> regards,
>
> Rob
> ----- Original Message -----
> From: "Robert" <cateran1949@y...>
> To: <harryproa@...>
> Sent: Tuesday, May 11, 2004 7:58 AM
> Subject: [harryproa] Re: Harryproa Update
>
>
> > Thanks Michelle,
> > Love the latest version of the Harry and hope to see the
Visionarry
> > in the flesh in June when I am up that way. Are the little one's
> > available as kits ie all the materials needed + plans and how much
> > would they be. I am just curious, I don't have the time right now
and
> > as soon as I do , it'll be full bore on a Harry, probably this
latest
> > version.
> >
> >
> >
> >
> > --- In harryproa@..., "michele balharry"
> > <michele@o...> wrote:
> > > Hello Everyone,
> > >
> > > Well, this was a long time coming - I hope you all find
something of
> > > interest in the latest updates at www.harryproa.com ;
> > > a.. Elementarry and Elementarry camper in Australia and Brazil
> > > http://www.harryproa.com/Elementarry.htm
> > > b.. Harry http://www.harryproa.com/harry.htm
> > > c.. Arttu Heinonen building Visionarry in Finland Report 3
> > > http://www.harryproa.com/Arttu/Arttu_3.htm
> > > d.. Building Visionarry in Australia Report 8
> > > http://www.harryproa.com/building_Vis/building_Vis_8.htm
> > > e.. Rob Denneys new e-mail address : proa@i...
> > >
> > > Cheers,
> > >
> > > Michele
> > >
> > >
> > > --------------------------
> > > Michele Balharry
> > > Harryproa Pty. Ltd.
> > > ph: +61 02 6655 2016
> > > fax: +61 02 6655 9994
> > > e-mail: michele@o...
> > > web site: www.harryproa.com
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> > To visit your group on the web, go to:
> > http://au.groups.yahoo.com/group/harryproa/
> >
> > To unsubscribe from this group, send an email to:
> > harryproa-unsubscribe@...
> >
> > Your use of Yahoo! Groups is subject to:
> > http://au.docs.yahoo.com/info/terms/
> >
> >