You can set the sort order of messages. Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Hello Gardner, You could use 1" core, I believe strength goes up exponentially with thickness. I used 1" A650 Corecell on the deck of the float hulls I am...
Well, my brief stint as a professor is finished! I plan on getting everything ready to go and start building panels ASAP. I'll probably start setting up the...
I would be interested in how you end up building the table. I have just started to think about mine, and I was considering using tongue in groove plywood and...
Hello Gardner, I considered a number of options but in the end the melamine table works fine for a one time project.  I am done with mine and it needs to go...
Hi, I am almost done with the harryproa design I have settled on. It will be a trailerable boat, 35' lw, 24' ww hull, collapses to 12' beam in the water and...
... Not sure about these assumptions. A ratio of main/jib of 300/225 might be out of balance with too large a jib. Also this appears to have a masthead rig...
Well, with a full roach, I could get > 300 sq ft out of the main, so I could reduce the jib and get the same sail area, which is probably too much anyway. I...
That's definitely too much sail area. But I like it. <g> As much as I love the schooner rig, for too many reasons to mention again, I'm now looking at a...
Hi, So which harry are you going with? This boat started out as a copy of sidecar, adjusted a displacement to handle a fat guy. I figured I could build that....
Damnation! I am an idiot! Your comment on building a harry lead me back to the harryproa web site and looking at it again, I realized that I have just...
Deafening silence. Todds work wsaa certainly impressive, but Noe extra thing to sort out. I know the basic Harry works, but will still need some refining to...
I hesitate to say I'm going with any boat, because that would imply action, and that's not likely to happen this year. If I had to choose, I'd go for a...
I notice that you didn't list budget as one of you criteria <grin>. That seems to be my primary constraint at the moment, which leads me to try to find...
Rob just rang me to pass on the report. They are covering the B2G as they would not pass the experience specs for the crew, including his young daughter Katie...
I have been watching the web site, but I can't seem to find a link to what the weather conditions were. I did see that Black Jack averaged 14.8 kts over teh...
hello, Â been imagining the race too, while coming down the coast. i got in to mandurah today after 8 days sailing. very lucky winds made good tme. Â so the...
thanks, how's your projject? do you still get out on the jjarcat? i was just looking at the charts to albany, it would make a nice couple with the kalbarri...
I am considering a test construction of a dinghy with resin infusion. I have found a deal on 6mm DC/TC (double/triple cut) corecell for $25/sheet (for 4x8...
Hi Doug, Had to spend a lt of time with my mother as she is fading fast, and as well having to keep up with a couple of hundred external studies students,...
can be found here: http://www.julesmarineart.com/galleries/yacht-racing/Brisbane-To-Gladstone-09/Multihull-Friday/index.php?directory=.¤tPic=144...
Rare bird suffered a corroded rudder post. It was supposed to be stainless 3.6.1. The posts are going to be replaced with carbon ones. The owner reckons it...
So rudders failed again. See Rare Bird first test sail from Harryproa.com http://www.harryproa.com/building_Vis/images_Jan2006_2/FirstSail/11.htm  It seems...
Hopefully Rob will post more details when he gets back online. I was wondering how far they got before the rudder post gave out. Any wind speed/boat speed...
