Hi Malcolm,

I'm after the fairing, headlight, mounting brackets and a front fender -
anyone around here got any spares?. How much would you be willing to
take for the speedo?

The valve clearance check is pretty straight forward, though a little
time-consuming taking everything off (on a bike).. If you need any
help, let me know!


Cheers,


Carl


On Tue, 2005-01-25 at 14:38, malcolm wallace wrote:
> Hi Carl
>
> That is a good point. I will try this. I have had a lot of troubles following
the manual as it is unclear. Tommorow is a public holiday so I will get into the
garage and do my best.
>
> I don't have the frame any more but I do have the spedo cluster and a fuel
tanks and the rear shocker. I think that is it.
>
> I still have not done the float levels, as each time I tried I was uncertain
what eacactly to measure.
>
> Thanks for the advice.
>
> I will send you a couple of pics this week.
>
> Malcolm Wallace
>
> Carl Johnston <cjohnston@...> wrote:
> Hi Malcom,
>
> Did you ever get this sorted?
>
> I decided to do a valve clearance check on mine and found that every valve
> was out of spec, one I couldn't even measure a clearance. So I fixed the
> clearances, and 'lo and behold, the goes heaps better - "Like a bought
> one!". Before it would struggle to start, though be "OK" once warm,
> wouldn't like revving past 5500RPM, to which it sounded like it was
> backfiring..
>
> I suggest you do this to your motor if you're still having issues with it
> revving out.
>
>
> Also, do you still have the body of the GS250FW sitting around? Or did
> you just buy the motor?
>
>
> Cheers,
>
>
> Carl
>
> >
> >
> > I am still have ing trouble starting. and when running very slow to
> > rev up to a maximum of about 6000RPM.
> >
> > I have noticed that the igniter the wreakers gave me is from a GSX
> > 750. Could this be a issue?
> >
> > I checked the timing last night it is fine.
> >
> > I tried to check the float levels and I am unsure to where I am to
> > measure from.
> >
> > If anyone can help me out it would be fantastic.
> >
> > Malcolm
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
> ---------------------------------
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://au.groups.yahoo.com/group/suzuki250fours/
>
> To unsubscribe from this group, send an email to:
> suzuki250fours-unsubscribe@...
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>
>
> ---------------------------------
> Find local movie times and trailers on Yahoo! Movies.
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>