Hi mate, the CDI unit should have two block connectors
to it, the white wire should be the live and the black
wire underside of it is earth (just check with the
meter) the other block should have three wires, one is
for the + side of the coils which actually serves both
coils, the other two are the - sides of each coil.

Check the power to both sides of the coils when the
ignition is on, use a bulb & wire if no tester, the
bulb should light on contact with either side. If you
have this you shoul have a spark unless the leads have
a problem like not contacting with the cap correctly.
Give us a shout if you get stuck, I used the similar
engine unit and had to wire the whole thing off the
wiring diagram off the 250four site, it did the job
great, all the best, Craig.

--- wallacemalcolm <wallacemalcolm@...>
wrote:
---------------------------------
Hello,

I have purchased a GS250FWD for a go kart I am
currently
building.

I am having troubles with getting a spark.

I don't have the complete wiring loom, so I am unsure
if power is
getting to the ignition unit.

I purchased the wire loom, ignition unit and coils
from a wreaker
and they said thats all I need to get it going.

Can anyone help? Is there a place that would be able
to put me
in the right direction what to do and what I need.

Any help would be greatly appriciated.

PS I have just got the wire diagram.
Thaks very much.

I will see what I can do.



---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:
http://au.groups.yahoo.com/group/suzuki250fours/

To unsubscribe from this group, send an email to:
suzuki250fours-unsubscribe@...

Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.


Find local movie times and trailers on Yahoo! Movies.
http://au.movies.yahoo.com