Hy everybody! I'm new here am I hope that I'll find a Suzuki GSF250 Bandit Manual. The "little beast" is 1990 production and now I've some problem. Tkank you...
Hi Do you happen to have the carbies for the GS250FW thanks Mal ... interested! ... Hi Do you still have access to the parts? I have just bought a 1984 model...
Hi iu have 2 x 83 model GS250f's on both sets of carbies 2 jet screws are stuck. I cannot adjust at all. Is there anyway I can free these without killing the...
Jobert, First thing I would do is remove the spark plugs and check those for exccesive wear or junk. While the plugs are out, do a dry compression test and...
guys, to whom who could ever read this message, i am having a difficult time in fixing my bike. does anybody have a spare set of overhauling gasket for a...
Please please make it go, or buy it. Ok I have been building a off road go kart for years now and it just doest look like it is going to go. my let down is i...
I am selling my GS250FWD 84 mod not running $400 has been sitting in a garage since 98 and now will not start. i have removed carbies and and cleaned them and...
Hi Guys, Just wondering if these pages are still current as the last post was quite awhile ago. I have just bought a GS250FW that wasn't running and after...
Hi Mark I may not be the best person to answer this as i can still not make mine go. however the times that it did go it was very limited with the revs, it was...
Thanks Mal, But since I cleaned the carbies it starts first go now and I think the problem may be the mixture screws. I have been informed that the valve...
Hey Mal, Just got off the phone with a bike mechanic and told him the symptoms of my bike and when I told him that I didn't have the air cleaner and box on it...
G'day all, I have read over this thread and recieved good idears. Thanks to all people who have answered questions beforehand. I too have a few questions and I...
Hi Luke, I just checked the settings of the photo section of the Yahoo group page and it seems that members weren't allowed to upload photos. I have changed...
Cheers John, I'll post my photos ASAP If anyone could cross reference their bike with my photos i would be grateful Or if anyone is wrecking a bike with...
Hey frogs, just wondering if you were able to get your gasket set? did you get new rings and bearing too! If you were able to source them, where did you get...
Hey mark, the local suzuki dealer (newcastle) had all but the cylinder gasket which took a week or so from japan. Had tried sourcing from japan and after...
hey guys, i have done a paint job for my bike. could somebody please take a close up picture of the GS250FW design logo (located at the bottom cover for the...
I have a GS250FW too. I have had the same probs with hard starting. It all comes down to the idle jets (4 of them). As these engines are quite small but have...
I have just printed the pictures out and will go outside now to compare. I already have the tank off and the carbs out so I will have a good old look for you....
OK. With the coils, running from left to right. Coil 1 (left) Orange/White trace, White. This coil runs cyl 4, 1. Coil 2 (right) Orange/White trace,...
What kind of problems are you getting now? Spark int he wrong place at the wrong time? Weak spark? No spark? I may have some other suggestions... cheers ...
This board has been stagnant for a while so I thought it would be good to see where current members are located. Who knows some of us may be close by to help...
