Just found neat old GS250FW sitting in the corner of a warehouse out of site, but looking pretty good for an olde. Needed a bike project. Took a couple of...
I am doing the same to a gs250fw reciently aquired. All parts so far are availible through my local suzuki dealer. (fork seals, filters, etc) If you can't get...
I think you folks may have the market for 250 4s. We don't even have a dealer here and the others don't stock. If you will post the contact info I will use...
I've just found a GF250 with almost all the parts but without the engine. I'm the owner of a GS450 from 1981 which is uglier than the GF, my apologies to the...
Hi. So you are going to put the GS450 engine in the GF250? Sounds interesting, please keep us updated on your project. I say sport, no streetfighter. -John...
Hey all. I've just got my bike license and bought a '84 gs250fw. Are they supposed to be gutless between 5500-8000rpm?? If the revs go below this (at highway...
... I think that's about right...I used to have a gf250s, its successor, and while it wasn't as bad, everything basically happens best if you keep it above...
Got mine Reged yesterday and have found it's similar, goes ok up to about 5000, then a little flat though to 8000 and then pulls great to redline :) ! It feels...
ok, 6L/100km is the standard figure, i don't know about that flat spot tho, are you running a twin exhaust or a 4into 2into 1 system? I never noticed the...
I'm running the stock exhaust which is a 4 into 2 with a balance pipe. It's actualy a lot quieter than I exected, is there an easy way to open them up a bit? ...
Howdy: I a have a GS250FW (84-86?)that needs a monoshock and fork seals. Searching on line, even in England, doesn't seem to generate anything. I am back home...
I can help with your fork seal problem. Just did mine, used 'link' brand seals that are great quality. Part number 33-129-14 seals are 35x48x11. price is...
Ben: Thanks very much for the info. According to my US Susuki dealer, the GS250FW was only imported to Austriala and not the US. Basically, he said I might...
Hey Remminga, Can you tell me where the Melbourne dealer is and some contact details for the same. I also own a GS250FW that I am rebuilding and most of the...
I use Peter Stevens. www.peterstevens.com.au The "locations" tab on their web site has all contact details etc I would call them, don't know if they respond...
Hey Ben, thanks for getting back to me so quickly. I live in Woori Yallock which is in the Yarra Valley, so Peter Stevens in Ringwood is close to me. I...
Hey People. Are there any other GS250FW owner/riders out there in the Melbourne area. It might be nice to get a few people together and go for a ride...
Hey people. Is there any one out there looking for decals for their GS250FW? After getting my bike ready for a respray I began searching for decals and found...
Hi Guy's. Just thought I would post and let you know that my Decals have finally come through from Queensland! They turned out great and I have posted a pic in...
hey guys, just thought I would post and let you know that I have finally finished my bike and I got a roadworthy certificate today (YAY) and it is booked in at...
Hi Mark, Just had a look at your photos. Your bike looks very impressive in its new colour scheme. Must have been a lot of work getting it to look so clean. ...
Thanks John, it was a lot of hard work as you can imagine and took around 6 months to complete although I was only working on it on my week ends so I suppose...
Howdy: Just a short note regarding parts etc.and trying to work with Peter Stevens Motorcycles in Melbourne which I was hopeful would be helpful in finding...
When I had my GF250 many years ago I bought parts from my local Suzuki dealer, Freedom Motorcycles, in Brookvale (Sydney). They had the microfiche and ordered...
Wow, what a great looking bike! puts my little effort to shame. After looking at your pics I think I need to tear my all down again and start over. Well done...
