You can set the sort order of messages. Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Just found neat old GS250FW sitting in the corner of a warehouse out of site, but looking pretty good for an olde. Needed a bike project. Took a couple of...
... for keeping me informed i hope that you have no more igniter probs and your bike stays reliable. i will get my mate to order a new igniter as it's his bike...
Yes and Yes, Shipping took a little while but the unit fits straight on Same plugs and same colour wires! Bike fired and ran first time.... go for it... Luke ...
Hello there, My ignitor is "knackered" as well. I have just ordered an aftermarket one from a guy in New Zealand. Waiting for arrivial, you can wait to see...
Hello Can any of you guys help with a Suzuki GF250 Igniter as i need a replacement unit as the one i have is knackered, the code is GF250 32900 - 34A00 TR...
after testing it appears that my ignitor is toast. HAs anyone purchashed an aftermarket ignitor? The suzuki ones seem to have a badish reputation.. cheers, ...
Ok, you should get spark on cyl 1 and 4 at the same time and 2 and 3 at the same time. It is called wasted spark ignition. So if it looks like it is all...
Cheers scott! I'm in newcastle 2 hours north of sydney. the problem I'm getting is spark on all cylinders I think at the same time. It a little hard to tell...
This board has been stagnant for a while so I thought it would be good to see where current members are located. Who knows some of us may be close by to help...
What kind of problems are you getting now? Spark int he wrong place at the wrong time? Weak spark? No spark? I may have some other suggestions... cheers ...
OK. With the coils, running from left to right. Coil 1 (left) Orange/White trace, White. This coil runs cyl 4, 1. Coil 2 (right) Orange/White trace,...
I have just printed the pictures out and will go outside now to compare. I already have the tank off and the carbs out so I will have a good old look for you....
I have a GS250FW too. I have had the same probs with hard starting. It all comes down to the idle jets (4 of them). As these engines are quite small but have...
hey guys, i have done a paint job for my bike. could somebody please take a close up picture of the GS250FW design logo (located at the bottom cover for the...
Hey mark, the local suzuki dealer (newcastle) had all but the cylinder gasket which took a week or so from japan. Had tried sourcing from japan and after...
Hey frogs, just wondering if you were able to get your gasket set? did you get new rings and bearing too! If you were able to source them, where did you get...
Cheers John, I'll post my photos ASAP If anyone could cross reference their bike with my photos i would be grateful Or if anyone is wrecking a bike with...
Hi Luke, I just checked the settings of the photo section of the Yahoo group page and it seems that members weren't allowed to upload photos. I have changed...
G'day all, I have read over this thread and recieved good idears. Thanks to all people who have answered questions beforehand. I too have a few questions and I...
Hey Mal, Just got off the phone with a bike mechanic and told him the symptoms of my bike and when I told him that I didn't have the air cleaner and box on it...
Thanks Mal, But since I cleaned the carbies it starts first go now and I think the problem may be the mixture screws. I have been informed that the valve...
Hi Mark I may not be the best person to answer this as i can still not make mine go. however the times that it did go it was very limited with the revs, it was...
