Hi all. As promised to Brian I have finally gotten down to Peter Stevens and enquired about a full carby kit for the GS250FW. I was told that they dont come in...
Hey Scott, it looks as though you will be on the road in no time. I recovered my seat too only a couple of weeks ago and I got my vinyl from Spotlight as well....
Howdy All I just finished recovering my seat last night. It was a lot easier than I first thought it would be. Cost me a whole $8. First remove the old torn...
Ok, so I pulled the rectifier and cleaned all the wiring. I then charged the battery and started her up. Got a reading of 13.8 and stayed there. Now all I...
The regulator/rectifier is mounted behind the left hand side cover (as you are seated on bike) its the metal box with the fins that is held on with two Allan...
Howdy All Does anyone have a better, clearer copy of the wiring diagram for the GS250FW? I am trying to clean up my wiring but am finding it difficult to read...
Mine had problems mid range too, But I found that the more I ride it the better it gets! Also some previous owner had put a larger front sprocket on, changing...
Pity you're in Melbourne. Would have been good to have a bit of a cruise. Hoping to get mine on the road soon. Just need to save for rego money. Getting...
Thats great news Scott, it seems their are a few of us getting our bikes back on the road. I just had mine rego'd this morning and went for an 80km ride. I...
I have had my GS250FW in pieces for so long that I can't remember when it was running last. I finally stripped the carbs, painted the frame and exhaust and...
Looks like I will be getting the BT45's. Found the right sizes after talking to some other suppliers. $110 Front and $130 rear. But my friends father is a...
I'm running a Bridgestone Battlax BT45 100/90/16 on front, very happy with it, going to fit same brand to rear in a 110/90/18. No problem getting these sizes...
Hey All I'm looking at putting some new rubber on my GS250FW but not sure what size. On the bike now are Front 100/90/16 Rear 110/90/18. The workshop manual...
Great Idea Scott. I will let you know about Brians jets and stuff when I get the details. Regards, Mark ... though ... numbers ... call ... down ... doubt ... ...
Hey all, I've been a bit of a lurker here for a while. I have a GS250FW that should be on the road in the next month or so. My though was that perhaps we...
Hi Brian, thought I would see if I can help you from my end. Peter Stevens is a local shop not far from me so I will give them a call myself as its only a...
Wow, what a great looking bike! puts my little effort to shame. After looking at your pics I think I need to tear my all down again and start over. Well done...
When I had my GF250 many years ago I bought parts from my local Suzuki dealer, Freedom Motorcycles, in Brookvale (Sydney). They had the microfiche and ordered...
Howdy: Just a short note regarding parts etc.and trying to work with Peter Stevens Motorcycles in Melbourne which I was hopeful would be helpful in finding...
Thanks John, it was a lot of hard work as you can imagine and took around 6 months to complete although I was only working on it on my week ends so I suppose...
Hi Mark, Just had a look at your photos. Your bike looks very impressive in its new colour scheme. Must have been a lot of work getting it to look so clean. ...
hey guys, just thought I would post and let you know that I have finally finished my bike and I got a roadworthy certificate today (YAY) and it is booked in at...
