After a long time I have now fixed my wiring got a new CDI, got spark, put new head and base gasket onto my GS250FWD with a lot help from you guys. Thank you ...
Hi Malcom, There should be two openings into the venturi on the tops of the carbs, they will have vertical mounting points for tubes. These tubes are used for...
I am still have ing trouble starting. and when running very slow to rev up to a maximum of about 6000RPM. I have noticed that the igniter the wreakers gave me...
Hi Malcom, I'm having a similar problem with mine (though I haven't got the time to work it out - I think it's fuel related) - mine will rev past 6k, though ...
Hi Carl I have not tried any different mixtures. I have the choke connected and when cold will only start with it and takes a while to get going. Once going...
Hi Malcom, The idle mixture settings are the four screws on the top of the carbs, furthest towards the engine. Stock settings are at 1.5 turns from lightly ...
Hi All, Just a quick note to let you know that I have a GS250FW for sale - Red, registered and runs beautifully.... Anyone interested or knows of anyone that...
Thanks John John Avis <john_avis@...> wrote:I am pretty sure it is the same. -John Avis ... Yahoo! Groups Links To visit your group on the web, go to: ...
Can anyone tell me where I might pick up a couple of cheap carbs? Mine have been severely treated by a previous owner and by the time I get replacement parts,...
Hi Garry, if its the gf250s spec bike you have, the gsxr250 carbs go straight on ie they are the same inlet bores and the cables are the same too. I fitted a...
Hi Malcom, Did you ever get this sorted? I decided to do a valve clearance check on mine and found that every valve was out of spec, one I couldn't even...
Hi Carl That is a good point. I will try this. I have had a lot of troubles following the manual as it is unclear. Tommorow is a public holiday so I will get...
Hi Malcolm, I'm after the fairing, headlight, mounting brackets and a front fender - anyone around here got any spares?. How much would you be willing to take...
Still haven't sold my 87 GF250S....should be appearing in "Just Bikes" next week. If anyone knows of someone who'd be interested, have them drop me a line...
Hi Jim, I've been a member for about a year or so and have 2 GF250 bikes.I am all ways on the look out for these bikes, as you know only a hand full was sent...
Hi Everyone, I have just swapped my old car for this bike and have to say I am quite impressed with it's performance. I have had a RGV 250 etc, and for a four...
... Yeah...mine has 68,000ks on the clock and still runs like a watch!...no trouble so far, but being a four, there's the usual complexity when eventually it's...
Hello, I have just bought a GS250FW and know nothing about it. Could you please assist me in finding out a sort of value to the bike. What did you sell yours...
I am the proud owner of a GS250FW and know nothing about the bike. Could anybody tell me anything about this bike and what it would be worth if I restore it...
David, These are rare bikes here in Australia and probably not worth much even in great condition (probably less than $2000). For more details on the history ...
Hi Anthony, I had a reply from you a long time ago about my GS250 not wanting to idle. You said you had the same problem. Did you ever get an answer? I finally...
Hi All, Just wondering if anyone out there had a copy (or knew where I could obtain one) of the Microfiche for a GS250FW. I'm specifically after the part that...
Hi There is a scan of the manual, I have a copy somewhere, when I find it I’ll send the pages that you want. Think the scan document was linked off this site...
The repair manual can be downloaded from the Yahoo! Groups page in the file section. There is a link from www.geocities.com/john_avis/suzuki -- it's not the...
Okay, got the manual. If anybody has the microfiche, put me in for a copy. Need to replace the seals on the fronts forks of my gf250. can't find any details in...
