You can set the sort order of messages. Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
My bike reads 11,500rpm redline, but I read somewhere that they are 10% out which makes it 10,350rpm redline. I am not a speed demon and for that matter am...
The GF250 (and presumably the GS250FW) has a 13000 redline.. Like many 4 cylinder 250s they operate best at higher revs, usually above 5000rpm. The gearing...
Excellent :) Those air boxes are a PITA.. I found that I could pull the carbs out before the air box with quite a bit of force, but it is hard :) Someone ...
Thanks, The carb cleaner worked so well it stripped the paint clean of the carbs!!! It took me almost 2 HRS to get the air filter box out??? Not sure how you...
The Across has (what I believe to be) a later version of what's in the GS250FW, the manual won't help you with specifics (valve clearances etc), but it will...
Thankyou Carl, I downloaded the PDF's They were helpful! Do you know if the Across has alot in commen or just the carbs? Also where would I find this carb...
Assuming that you'll be doing this yourself, I'd recommend you download the workshop manual from this site - then go and look for a GSX250F (Across) manual as...
Got it for $300. Needs carbs rebuilt due to fuel blokage. The bike is near new, black in colour and only 20,000km. Garaged since 1993. Another $500 and i'll...
Thanks John, manage to have smooth tranmission from gear to gear now and the bike doesn't stall when it stop or idle. I reckon i did not manage to fully clean...
Jeremy, Seems unlikely you would damage anything else in such a fall. Unless the cable broke inside - is there resistance when you pull the lever? Can you see...
hi, This is jeremy. I have a GF 250 bike. i usually dunn park my bike out in the lawn as my mates have taken up the car space in the garage. recently there has...
The GS250FW is rare here in Australia but unfortunately not valuable. Most I see for sale (rarely) are in pretty bad condition and go for less than $1000,...
Hey thanks CARL but I live in Tamworth NSW. BIKE is at service shop being inspected and quoted. I have not bought it yet as it is not yet running. I don't wont...
Hi James (?), It sounds like a bargain, but that all depends. You should be aware that these bikes are very rare, getting parts for them is reasonably ...
Hey found a GS 250 garaged for the last 13 years. Owner says it was good when it went in but it won't start now! Any advise? Asking $300 Missing left side...
Hi Mark, Sounds like you've got yourself a bargain. They have a lot of features for that money: the high-tech 10-piston brake setup, good fuel range, and all ...
Hi, to everyone. Have just bought one of these and seems good. Its not pristine of course but for a$500 what can you get? It seems a little screamer and only...
you said: can any one tell me if their is a more popular bike exhaust that will <BR> fit the gf250 1986 as ican not seem to locate one thankyou an after <BR> ...
can any one tell me if their is a more popular bike exhaust that will fit the gf250 1986 as ican not seem to locate one thankyou an after market one will...
Just wanted to wish you guys well and say goodbye, as I've parted with my sweet little GF250, in order to fund my new(ish) SV650S (all of which I'll post on my...
Can you remember any of the details about the fork seals? Mine need rebuilding, and as the UK never officially received the bike, no-one knows much about it....
Hi Guys, Thanks for your replies, I've already downloaded the manual which was a great help in re-building the whole bike from the frame up - what a project...
Okay, got the manual. If anybody has the microfiche, put me in for a copy. Need to replace the seals on the fronts forks of my gf250. can't find any details in...
The repair manual can be downloaded from the Yahoo! Groups page in the file section. There is a link from www.geocities.com/john_avis/suzuki -- it's not the...
Hi There is a scan of the manual, I have a copy somewhere, when I find it I’ll send the pages that you want. Think the scan document was linked off this site...
Hi All, Just wondering if anyone out there had a copy (or knew where I could obtain one) of the Microfiche for a GS250FW. I'm specifically after the part that...
Hi Anthony, I had a reply from you a long time ago about my GS250 not wanting to idle. You said you had the same problem. Did you ever get an answer? I finally...
